Products

All
Tensioning Tools
Flange Management Tools
Torquing Tools
Hydraulic Jacks & Pumps
Machining Tools
  • Torque tester-Accessories (Torquing)
    Torque tester-Accessories (Torquing)
    From simple dial wrenches to electronic data storage and joint analyzers for R&D
    Measure Torque Before, During, and After Assembly
    Automobile
  • Torque Multiplier-Manual Tool (Torquing)
    Torque Multiplier-Manual Tool (Torquing)
    Available in multiplication factors of 5:1, 25:1 & 125:1. Covers torque requirements 47539 Nm
    Precise tightening and loosening of all heavy duty fasteners
    Oil and Gas , petrochemical, power generation
  • 1500 Bar standard Tooling
    1500 Bar standard Tooling
    Standard Bolt ¾th to 4 inch diameter range due(M 16 to M-100)
    Special custom made design available, fits all pipeline flange to ANSI B16.15, MSS SP-44,Operating pressure 1500 bar
    Oil and gas, power generation, wind
  • Typhoon Hi Load Tensioner
    Typhoon Hi Load Tensioner
    Single and Multi Stage Tensioners available
    Suit modern hi-load, tight space bolting applications, special custom made design available, operating pressure 1500 bar
    Oil and gas, power generation, wind
  • Xtra Load Hydraulic Bolt Tensioner
    Xtra Load Hydraulic Bolt Tensioner
    Xtra load range developed and suit all common size flanges, tools are fitted with misalignment compensation, over stroke safety
    High load,1500 bar max pressure
    Oil and gas, power generation, wind
  • Sub Sea Hydraulic Bolt Tensioner
    Sub Sea Hydraulic Bolt Tensioner
    30mm piston stroke,1500 bar operating pressure
    Tools for subsea use, Pressuring up to 1500 bar
    Subsea
  • Pumps
    Pumps
    1500 bar electric/air operated/hand
    Mounted in robust tubular steel transportable frame, capable of providing output pressures up to 2500 bar
  • Echo meter Bolt Extension Measurement
    Echo meter Bolt Extension Measurement
    Accurate way to measure bolt load and bolt elongation, ultrasonically
    Quickly and accurately, and displays the result on an easy to read screen
    Wind, Power generation, oil and gas, critical bolting
  • FA9TE Flange Alignment Tools
    FA9TE Flange Alignment Tools
    Align force 90 kN (9 tone)
    Larger diameter, higher pressure flanges.
    Petrochemical, nuclear, mining
  • FA1TM flange Alignment
    FA1TM flange Alignment
    Align force 10 kN (1 ton), weight only 1.6 kg
    Smaller diameter low pressure flanges
    Petrochemical, nuclear, mining, oil and gas, center used subsea also
  • FA4TM Flange Alignment Tool
    FA4TM Flange Alignment Tool
    Align force 40 kN( 4 ton), mechanical weight only 8.6 kg
    Medium diameter, medium pressure flanges.
    Onshore, commission, construction
  • VLW18TE & VLW18TI Precious Lifting Wedge
    VLW18TE & VLW18TI Precious Lifting Wedge
    Require an access gap of 9.5mm (0.37") and will provide a lifting force of 18T.
    To assist in the lifting of heavy equipment when access is restricted, recommended to be used in pairs
    Construction, shutdown, petrochemical, nuclear, mining
  • FC10TE Flange closing tool
    FC10TE Flange closing tool
    10T(100kN) closing force and weight only 11 kg
    With a bolt hole diameter of 25 cpmm (‘1’) or greater, and can pull from a distance of 600mm down to 0 mm with a force of 10T (100kN) per tool
    Construction, shutdown, petrochemical, nuclear, mining
  • MG7TM Flange Spreading
    MG7TM Flange Spreading
    68kN spreading force ( 6.8T),mechanical
    Flange joint you are working on has an access gap of 2.0mm only
    Construction, shutdown, petrochemical, nuclear, mining
  • Flange Spreading Wedges
    Flange Spreading Wedges
    9T( 90 kN) to 25T (240kN) mm spreading Gap
    If the flange joint has an access gap of 6.0mm,available in mechanical, hydraulic mode of operation,available with integral pumps and maximum spread up to 103 mm, recommended & used in pair
    Petrochemical, nuclear, mining
  • OD Mount
    OD Mount
    4″ to 86″ O.D.
    (101.6 to 2184.4 mm)
    (Depending upon model)
  • ID Mount
    ID Mount
    3/4″ to 16.25″ O.D
    (19.1 to 412.8mm)
  • 600 Series RBL-G2 and SB Clamshell Lathes
    600 Series RBL-G2 and SB Clamshell Lathes
    600 Series RBL-G2 and SB Clamshell Lathes
    .25” (13.7 mm) to 60” (1524 mm) OD mounted split-frame lathes
  • 200 Series BEVELMASTER® ID Mounted Beveling Equipment
    200 Series BEVELMASTER® ID Mounted Beveling Equipment
    200 Series BEVELMASTER® ID Mounted Beveling Equipment
    .610” (15.5 mm) to 36” (914.4 mm) Pipe Beveling machines
  • 300 Series Tube Squaring Solutions
    300 Series Tube Squaring Solutions
    300 Series Tube Squaring Solutions
    .125” (3.2 mm) to 8.625” (219 mm) OD Tube squaring machines
  • 500 Series SEVERMASTER® Auto-Cycle Tube Severing Solutions
    500 Series SEVERMASTER® Auto-Cycle Tube Severing Solutions
    500 Series SEVERMASTER® Auto-Cycle Tube Severing Solutions
    .25” (6.4 mm) to 16.0” (406.4mm) OD Tube severing machines
  • Bolt Tensioner
    Bolt Tensioner
    Covering stud sizes 3/4” to 3.1/2” (M-18 to M-85)
    Made from high strength stainless steel ,suitable for higher pressure rating flanges (API 170 - 10K),Safe design in event of piston ‘Over Stroke' ,Multi tensioning
  • SUPERBOLT
    SUPERBOLT
    a. Designed as direct replacements for conventional nuts and bolts
    b. Variants available- Nut Style Tensioners, Bolt Style Tensioners, Flexnuts, Expansion Bolts, Pre-Designed Solutions & Specials
    c. Oil & Gas, Petrochemicals, Mining, Power Generation, Steel Mills.
  • Single Acting Cylinder
    Single Acting Cylinder
    CAPACITY: 5-100 ton
    STROKE: 50-250 mm
    Max Pressure: 700 bar
  • Double Acting Cylinder
    Double Acting Cylinder
    CAPACITY: 10 -300 ton
    STROKE: 150-300 mm
    Max Pressure: 700 bar
  • ALUMINUM CYLINDER
    ALUMINUM CYLINDER
    CAPACITY: 5-100 Ton
    STROKE: 50-250 Mm
    Max Pressure: 700 Bar
  • CENTER HOLE CYLINDER
    CENTER HOLE CYLINDER
    CAPACITY: 5 -100 ton
    STROKE: 50-250 mm
    Max Pressure: 700 bar
  • LOCK NUT CYLINDER
    LOCK NUT CYLINDER
    CAPACITY: 50 -500 ton
    STROKE: 50-300 mm
    Max Pressure: 700 bar
  • PULLING JACK
    PULLING JACK
    CAPACITY: 10-30 ton
    STROKE: 150 mm
    Max Pressure: 700 bar
  • TOE JACK
    TOE JACK
    CAPACITY: 5-30 ton
    STROKE: 120-160 mm
    Max Pressure: 700 bar
  • Engine Pump & Battery Pump
    Engine Pump & Battery Pump
    Air cooled 4 cycle Gasoline Engine
    Volume- 169 cc & 86 cc
    Max output-2000 rpm & 4200 rpm
  • Motor Pump
    Motor Pump
    Motor Power: 1, 2 , 3, 5 HP
    Max Operating Pressure: 700bar
    Voltage: 220V 3ph 50/60Hz
  • Foot Pump
    Foot Pump
    Can be used by oil pressure 700bar operating by air 7bar.
    Air oil pump is that can use conveniently by single acting or double acting ram.
  • Hand Pump
    Hand Pump
    Ultra light weight and compact design for easy portability!
    CAPACITY: 800-10000cc
    Max Operating Pressure: 700 bar
  • AC Pump
    AC Pump
    Extra option in cooler( 3kg)
    Availability with the hydraulic punch & torque wrench pump
    Enable to maximize the efficiency of work
  • TTZ
    TTZ
    365 Nm - 49862 Nm
    Multi purpose Hose Coupler,Simple connect Hex Links, Efficient mechanical Design,Slim Design for Universal Fit,Highest Quality internal Metals
    Petrochemical, Offshore, Subsea, Power Generation, Shipping
  • Low Profile & Compact cylinder
    Low Profile & Compact cylinder
    Capacity-5-150 ton & 10-100 ton respectfully
    Stroke- 5-30 mm & 35-50 mm respectfully
    Max Pressure- 700 bar &
  • 1/3 HP Motor Pump
    1/3 HP Motor Pump
    Motor Power- 1/3 HP
    Max Operating Pressure- 700 bar
    Voltage- 220 V 1ph 50/60 Hz
  • 1/2 HP Motor Pump
    1/2 HP Motor Pump
    Motor Pump-1/2 HP
    Max Operating Pressure- 700 bar
    Voltage-220V 1ph 50/60Hz
  • TTX
    TTX
    228 Nm- 40194 Nm Torque
    Reaction Arm Mounted On The Square Drive Eliminating Torsional Force On The Cylinder. It Also Enables To Customize The Reaction And Suit The Application
    Petrochemical, Offshore Subsea, Power Generation, Shipping
  • Juwel Electrical Tool
    Juwel Electrical Tool
    150Nm To 12000 Nm Torque
    Proven Gearbox Technology, Straight And Angle Type Available
    Infrastructure
  • HIGHFLOW 115 or 230v
    HIGHFLOW 115 or 230v
    The HIGHFLOW 115V/230V power pack is one of the fastest power-packs available.
    It has a 4.4 liter reservoir (also available with a 7.75 liter reservoir) and is able to assure parallel joint closure faster with less passes from a safe distance.
    HIGHFLOW is available with a twin motor.
  • HIGHFLOW
    HIGHFLOW
    The HIGHFLOW AIR is a super high-flow, 770 cu. in. heavy duty Power Pack for hydraulic torque tools and for all 10,000 psi equipment.
    It is supplied with built in air filter/lubricator and has a resevoir of 4.4 Liters.
    (Also available with a 7.75 liter reservoir.)
  • DYNAMIC
    DYNAMIC
    When low weight and size is mandatory, no other pump can meet the performance of DYNAMIC
  • Nut Splitter
    Nut Splitter
    Fits Bs1560 / ANSI B16.5 flanges,Low maintenance
    Bolt sizes from 3/4in to 3.1/2",Adjustable cutting depth
    Power generation, steel, oil and gas, petro chemical
  • NS20TE External Hydraulic
    NS20TE External Hydraulic
    36mm to 50mm (across flats) nut size range
    Metric Nuts from M24 to M30
    Imperial Nuts from 7/8" to 1 1/4"
  • Ratchet Type
    Ratchet Type
    Available in set of 12 models (2.5 Nm to 2700 Nm).
    Light weight, high strength, aluminum alloy body
    Power, Shipping, Ideal for Smaller bolts
  • Slugging Wrench
    Slugging Wrench
    Available in a range of sizes from 22 mm to 230 mm
    Heat treated to achieve optimum Impact resistance. Larger striking area to increase safety in use
    Oil and gas, petrochemical, power generation
  • Secure-Grip Valve change out tool
    Secure-Grip Valve change out tool
    Developed to assist in the removal of wafer/butterfly valves, spades/spacers or gaskets from large flange joints.
    adjustable to enable the tool to operate in a range of situations.
    Petrochemical, Nuclear, Mining
  • Secure-grip mechanical flange spreader
    Secure-grip mechanical flange spreader
    Used on all flange types with bolt-hole sizes ranging from 24mm (0.94”) to 108mm (4.25”)
    low-to mid-end, mechanical model offersfrom 3.7T (37 kN) to 25 T (250 kN) of spreading force.
  • Impact socket
    Impact socket
    mproved observation of the socket rotation and code stamping
    used in cramped and poorly lit surroundings.
    automotive, mining, shipbuilding, wind power and the oil and gas industries
  • TTP
    TTP
    115 Nm - 10089 Nm Torque
    Accurate torque with low noise and low vibration,Maximum torque requires only 90 psi,Precision gearing produces constant calibrated power
    Petrochemical, Offshore, Subsea, Power Generation, Shipping
  • Special 12 points sockets
    Special 12 points sockets
    These sockets make it easy to board the screw as it has double 6-edge grip in the socket.
    Available for square drives : 1/2”-1 1/2” ,Wrench width between 10-105 mm.