Flange Working Tools AllFlange AlignersFlange ClosingFlange SpreadersVertical Lifting Wedge FA4TM Flange Alignment Tool FA4TM Flange Alignment Tool Align force 40 kN( 4 ton), mechanical weight only 8.6 kg Medium diameter, medium pressure flanges. Onshore, commission, construction FA1TM flange Alignment FA1TM flange Alignment Align force 10 kN (1 ton), weight only 1.6 kg Smaller diameter low pressure flanges Petrochemical, nuclear, mining, oil and gas, center used subsea also FA9TE Flange Alignment Tools FA9TE Flange Alignment Tools Align force 90 kN (9 tone) Larger diameter, higher pressure flanges. Petrochemical, nuclear, mining VLW18TE & VLW18TI Precious Lifting Wedge VLW18TE & VLW18TI Precious Lifting Wedge Require an access gap of 9.5mm (0.37") and will provide a lifting force of 18T. To assist in the lifting of heavy equipment when access is restricted, recommended to be used in pairs Construction, shutdown, petrochemical, nuclear, mining FC10TE Flange closing tool FC10TE Flange closing tool 10T(100kN) closing force and weight only 11 kg With a bolt hole diameter of 25 cpmm (‘1’) or greater, and can pull from a distance of 600mm down to 0 mm with a force of 10T (100kN) per tool Construction, shutdown, petrochemical, nuclear, mining Flange Spreading Wedges Flange Spreading Wedges 9T( 90 kN) to 25T (240kN) mm spreading Gap If the flange joint has an access gap of 6.0mm,available in mechanical, hydraulic mode of operation,available with integral pumps and maximum spread up to 103 mm, recommended & used in pair Petrochemical, nuclear, mining MG7TM Flange Spreading MG7TM Flange Spreading 68kN spreading force ( 6.8T),mechanical Flange joint you are working on has an access gap of 2.0mm only Construction, shutdown, petrochemical, nuclear, mining Secure-Grip Valve change out tool Secure-Grip Valve change out tool Developed to assist in the removal of wafer/butterfly valves, spades/spacers or gaskets from large flange joints. adjustable to enable the tool to operate in a range of situations. Petrochemical, Nuclear, Mining Secure-grip mechanical flange spreader Secure-grip mechanical flange spreader Used on all flange types with bolt-hole sizes ranging from 24mm (0.94”) to 108mm (4.25”) low-to mid-end, mechanical model offersfrom 3.7T (37 kN) to 25 T (250 kN) of spreading force.